Dimensions and weight
Installation depth: 32mm
Weight: 150 g
Fits all conventional Swiss & EU standardized sockets
Wireless technology
Zigbee PRO 3.0
Bluetooth Low Energy 5.0
Thread (hardware-ready)
NFC ready
Compatible products & systems
Integrated with the customary Swiss switch series Feller EDIZIOdue
Configurable with the zigfred app
zigfred funktioniert grundsätzlich mit jedem/r Zigbee-zertifizierten Leuchtmittel, Fernbedienung, Sensor oder Gateway. Leider sind vereinzelt Gateways auf dem Markt, die Drittprodukte blockieren.
zigfred ist bidirektional mit dem Zigbee-Netz verbunden. Das bedeutet, dass zigfred beliebige Leuchten im Zigbee-Netz steuern kann, als auch dass die Schaltkanäle des zigfred durch das Gateway und dessen Zubehör gesteuert werden können.
We officially support:
Philips Hue: App*, remote control*, light sources, sensors*, gateway
IKEA TRÅDFRI: Light sources
Osram Lightify: Light sources
Google Home: voice command*, app*
Amazon Echo: voice command*
Home Assistant & openHAB (with matching Zigbee adapter)
* Requires compatible gateway, e.g. Philips Hue Bridge
Outputs
zigfred uno
1x switch output up to 10 A / 2300W load capacity
Configurable as individual or toggle switch (schema 3 & 6). Switchable socket connection possible.
1x dimmer output for lamps up to max. 150W (RC, phase section).
Suitable for most conventional lamps, LED lamps and halogen systems with electronic transformer. Operation of conventional halogen transformers is not recommended.
For devices with high inrush current, the maximum connected load may be reduced.
Non-dimmable lamps can be operated in on/off mode at the dimmer output.
Power supply
230 V~ 50Hz Netzspannung
Requires less than 140 mW for standard operation
Three-wire control for maximum compatibility, supply from pole and neutral conductors
Two-wire control for retrofitting in installations without neutral conductor**
** Operation with neutral conductor recommended. Two-wire control is highly dependent on the light sources used and can unfortunately not be guaranteed. A small percentage of LED light sources do not support two-wire control. It could be the case that the light source flickers or glimmers when turned off. We recommend dimmable light sources from 8W for two-wire control.
Installation requirements
Empty socket at installation site (Ø 68 mm)
Smartphone with BLE for configuration
Dry, heated interior
Environmental conditions
Operating temperature: +5 °C to +35 °C
Storage temperature: +5 °C to 50 °C
Relative humidity: 10 % to 85 %, non-condensing (not suitable for bathrooms and unheated rooms, such as basements and garages)
Maximum operating height: 2000 m above sea level, without pressure equalization
